For enhancing the capacity of your tractor, you have a new chance. Your profitability and productivity can be affected by these choices. If you go for low-pressure and hi-tech tyres specifically, you will have these benefits as explained below:
Advantageous Features of a Low-pressure Tyre
The label IF Increased Flexion or VF Very high Flexion Tyre is usually borne by the Low-pressure tyres. Very high deflection and flexion capacity are the characteristics. As compared to the standard tyres, they have more deflection in their casing. Thus, you can use them without worrying about their deterioration risk.
As compared to classical tyres, the VF tyre size is usually bigger. Thus, your productivity and soil compaction are positively affected by it. This Continental Tyres Manchester is approved for speed ranging up to 70 km/h based on the reference.
Soil Preserved With Low-pressure Tractor Tyres
The soil gets compacted to a specific limit, resulting in the repeated passage of agricultural machinery and tractor wheel on the land. A small area of land can be exerted with pressure level by standard tyres that are inflated with normal pressure. It leads to soil compaction, which affects germination adversely. It also possesses a risk for the root growth in the seedlings.
The ground weight is distributed over a larger patch of contact with low-pressure tyres so that the trailer or tractor weight is spread out better. It is easier to work on the soil during the tilling phase. Thus, you will have fewer ruts and you need not opt for techniques of decompaction.
More Load Capacity
More load capacity is available in the Low-pressure tyres. Around 40% more weight can be borne by the high-tech models for the same wheel size. Normal speed is enabled by the low-pressure tyres due to their reinforced structure. It enables you to save time while moving to and from the storage place and the field.
Time Used for Adjustment of Tyre Pressure Saving
The tyre pressure should adjust between the field and the road if you are using standard tyres. If you are using usual tyres on an agricultural field, the pressure must be minimized to prevent slippage. But if you use these tyres on the road, low tyre pressure may damage the tyre casing. Thus, increasing pressure should prevent rolling resistance. This aspect takes time too.
No Slippage and Fuel Saving
Usually, slippage on moist soil has been experienced by many farmers. For completing the same work, it needs to produce more power. It results in excessive consumption and puts pressure on the operating budget of the farmer. The chances of slippage minimize and disappear comparatively in the low-pressure Cheap Tyres Manchester due to an increase in the contact patch. More grip is enabled in the lugs, and therefore, all the engine power is transmitted to the ground.
The savings of a farmer can be better over the lifespan of the tyre. It is because the ground doesn’t get hardened, compacted. As a result of this, to achieve the same production, it enabled him to use less amount of fuel.
Effective Traction
Every farmer searches for more engine power by purchasing a big tractor to get more yields. But, you can be on the profit side if you avoid this trick and make use of low-pressure large VF tyres in your tractor.
These sophisticated tyres are manufactured after a lot of development work and research. Their lug designs, thickness, size and angle are well optimized to offer the best soil penetration. It increases the capacity of the tyre to horizontally transmit tractive force and pull the trailer efficiently with minimum slippage. The manufacturers test and study the structure to get maximum self-cleaning during sowing season on heavy soils.
No comments:
Post a Comment